JATON CORPORATION MCG6618 V6 Card Type Multi-I/O card Chip Set Unidentified Maximum Onboard Memory None I/O Options Floppy drive interface, game port, light pen, mouse connector, parallel port, serial port (2), VGA port Data Bus 8-bit ISA Floppy drives supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives [Image] CONNECTIONS Function Label Function Label Floppy drive interface CN1 Mouse port CN5 Serial port (1) interface CN2 Game port CN6 Serial port (2) interface CN3 VGA port CN7 Light pen connector CN4 25-pin parallel port CN8 USER CONFIGURABLE SETTINGS Function Label Position » Mouse port enabled JP5 Closed Mouse port disabled JP5 Open » Parallel port enabled JP6 Closed Parallel port disabled JP6 Open » Game port enabled JP7 Closed Game port disabled JP7 Open » Serial port (1 or 2) COM1 enabled JP12 Closed Serial port (1 or 2) COM1 disabled JP12 Open » Serial port (1 or 2) COM2 enabled JP13 Closed Serial port (1 or 2) COM2 disabled JP13 Open » Floppy drive disabled SW1/1 On Floppy drive enabled SW1/1 Off USER CONFIGURABLE SETTINGS (CON’T) Function Label Position Floppy drive B select 360KB or 720KB drives SW1/2 On Floppy drive B select 1.2MB or 1.44MB drives SW1/2 Off Floppy drive A select 360KB or 720KB drives SW1/3 On Floppy drive A select 1.2MB or 1.44MB drives SW1/3 Off Hard drive is present SW1/4 On Hard drive is not present SW1/4 Off MOUSE PORT INTERRUPT SELECTION IRQ JP1 JP2 JP3 JP4 JP18 2 Closed Open Open Open Pins 1 & 2 closed 3 Open Closed Open Open Pins 3 & 4 closed 4 Open Open Closed Open Pins 5 & 6 closed 5 Open Open Open Closed Pins 7 & 8 closed Note: The exact location of pin 1 on JP18 is unidentified. SERIAL PORT (1) CONFIGURATION Setting IRQ JP11 JP14 » COM1 (3F8h) 4 Closed Pins 1 & 2, 3 & 4 closed COM2 (2F8h) 3 Open Pins 1 & 2, 5 & 6 closed Note: The exact location of pin 1 on JP14 is unidentified. SERIAL PORT (2) CONFIGURATION Setting IRQ JP11 JP14 COM1 (3F8h) 4 Open Pins 1 & 2, 3 & 4 closed » COM2 (2F8h) 3 Closed Pins 1 & 2, 5 & 6 closed Note: The exact location of pin 1 on JP14 is unidentified. TIMER INTERRUPT SELECTION IRQ JP15 JP16 JP17 2 Closed Open Open 4 Open Closed Open 5 Open Open Closed VGA GRAPHIC CONFIGURATION Setting S1 Monochrome On Color Off MISCELLANEOUS TECHNICAL NOTE Note: The exact location of SW1 on the MCG6618 V6 board is unidentified.